Tuesday, November 9, 2010

11/9 Government Jobs in India|Sarkari Naukri|Govt Jobs|Indian Government Vacancies

     
    Government Jobs in India|Sarkari Naukri|Govt Jobs|Indian Government Vacancies    
   
Scientist recruitment in NPL – National Physical Laboratory – sarkari naukri in india
November 8, 2010 at 10:21 AM
 

National Physical Laboratory Recruitment: National Physical Laboratory (NPL) has given a detail advertisement for the recruitment of Scientists.

National Physical Laboratory(NPL), a premier institution in the family of Council of Scientific & Industrial Research(CSIR), invites applications (online only) from Indian nationals for filling up positions as per details given below.

Last Date for closing of online submission of applications is 13/12/2010

Last Date for closing of receipt of application print out is 20/12/2010

  • About NPL:- R&D, maintenance and upgradation in calibration and measurement in areas such as, Mass, Volume, Density, Viscosity, Length, Temperature, Optical radiation, Pressure, Vacuum, Force, Torque, Hardness, Acoustics, Ultrasonics, Fluid Flow, Magnetism, Electrical power, voltage, current, frequency, impedance, attenuation, Time, etc.
  • Materials development and Characterization:- Research and Development of materials, processes and technologies in the areas of Metals & Alloys, Carbon technology, advanced ceramics, Polymeric & Soft Materials, Liquid Crystals, Single crystals, Thin film technology, Optical coatings, Superconductors, Ferrofluids, Photovoltaics, Luminescent Materials and Devices, Light emitting diodes, Porous silicon, nanoparticles, sensors, Certified Reference Materials, etc. NPL is having many advanced and sophisticated characterization facilities like AFM, Powder XRD, HRXRD, SEM, TEM, EPR, FT-IR/Raman, UV-Vis., AAS, ICPES, SIMS, PL, AES, LEED, XPS, STM(UHV) etc. to meet the requirements of in-house as well as other Institutions/Industries…………….http://site.npli.in/recruitment/groupIV/aboutNPL.php

Scientist Gr. IV (4)

  • No. of Vacancies: 01 post
  • Pay Scale: PB-4 Rs.37400-67000 Grade Pay Rs.8700
  • Age: 45 years

Scientist Gr. IV (3)

  • No. of Vacancies: 09 posts
  • Pay Scale: PB-3 Rs.15600-39100 Grade Pay Rs.7600
  • Age: 40 years

Scientist Gr. IV (2)

  • No. of Vacancies: 15 posts
  • Pay Scale: PB-3 Rs.15600-39100 Grade Pay Rs.6600
  • Age: 35 years

For more: – http://www.nplindia.org/applications-invited-online-recruitment-scientists-npl-last-date-13-12-2010

   
   
Vacancies for academic and administrative post in AMU- Aligarh Muslim University
November 8, 2010 at 10:14 AM
 

                ALIGARH MUSLIM UNIVERSITY
                           ALIGARH   (U.P.)
                      Advertisement No. 3  / 2010
                          Dated : 01.11.2010
 
     Applications on the prescribed form are invited for the following
post by 15.12.2010.
     The  number  and  nature of the posts may vary  at  the  time  of
interview.  Higher  initial  start  may be  given  to  the  candidates
possessing  exceptional  qualifications  and  experience.  It  is  not
obligatory  on the part of the University to call for interview  every
candidate   who   possesses  the  essential  qualifications   and   no
representation in this regard will be entertained from any candidate.
 

Aligarh Muslim University Recruitment: Aligarh Muslim University (AMU) has given a detail advertisement for the recruitment of various Vacancies like Associate Professor, Director, Professor, Assistant Professor, Assistant, Assistant Professor and Semi Officers.
The appointment will be made on contractual  / deputation basis.

Candidates are required to fill up the separate appllication form  for
each post / Centre.
 
      Professor  /  Director : Scale/PB Rs. 37400-67000  AGP  Rs.10000
      Plus Allowances
      Associate  Professor  : Scale/PB Rs. 37400-67000 AGP    Rs. 9000
      Plus Allowances
      Assistant  Professor  : Scale/PB Rs. 15600-39100  AGP   Rs. 6000
      Plus Allowances
 
  1. Director,  for the Centre of Malappuram (1 Post)
  2. Director,  for the Centre of Murshidabad  (1 Post)
 
      QUALIFICATIONS - ESSENTIAL:
       (i) An eminent scholar with Ph.D. qualification in the concerned 
      /  allied  /  relevant discipline and  published  work  of  high
      quality,   actively  engaged  in  research  with  evidence    of
      published  work  with  a minimum of 10  publications   as  books
      and/or research / policy papers in indexed / ISBN/ ISSN numbered
      Journals  and/or books and the University   developed  ISBN/ISSN
      numbered  books  and  list of journals /  books  hosted  in  the
      website of the concerned University.
      (ii) A minimum  of 10 years of teaching experience in University
      /  College, and/or experience in research  at the  University  /
      National  Level institutions / industries, including  experience
      of  guiding candidates  for research at Doctoral level;
      (iii)  Contribution  to educational innovation,  design  of  new
      curricula and courses, and technology- mediated teaching learing
      process.
      (iv) A minimum score as stipulated in the  Academic  Performance
      Indicator  (API)  based on Performance  Based  Appraisal  System
      (PBAS) developed by UGC  in these regulations.
 
                                     OR
 
      An Outstanding  professional with established reputation in  the
      relevant   field  who  has  made  significant  contribution   to
      knowledge.
       Desirable :
       The candidates are expected to have considerable experience in :
 
      a)   Designing  of  Agenda and drafting of the  minutes  of  the
      various University authorities  and   Handling legal matters  of
      the Centre.
      b)  Exercising close and effective supervision,  monitoring  and
      implementation of policy decisions.
       Candidates are also expected to have knowledge of modern methods 
      of management and their application in an Institution of  higher
      education and research.
  03.  Professor   of  Business  Administration,  for  the  Centre   of 
      Malappuram (1 Post)
 04.  Professor   of  Business  Administration,  for  the  Centre   of
      Murshidabad (1 Post)
       QUALIFICATIONS - ESSENTIAL:
 
      1. Consistently good academic record with at least 55% marks  in
      Master's  Degree in Business Management / Administration / in  a
      relevant discipline or consistently good academic record with at
      least  55%  marks in two year full time / three  year  part-time
      PGDM declared equivalent and recognized by AICTE / UGC
                                   OR
       First  Class  graduate  and  professionally  qualified   Charted 
      Accountant  / Cost and works Accountant / Company  Secretary  of
      the concerned statutory body.
       2.  Ph.D.  or fellow of IIM OR of an Institute  recognized  by 
      AICTE.
       3.  (i)  A  minimum of 10 years'  experience  of  post  graduate 
      teaching  /  industry / research / professional out of  which  3
      years  must  be at the level of  Reader/Associate  Professor  or
      equivalent excluding the period spent for obtaining the research
      degree.
                                  OR
       (ii)  Contribution  to  educational innovation,  design  of  new 
      curricula  and  courses,  and  technology  -  mediated  teaching
      learning process.
 
      (iii) A minimum score as stipulated in the Academic  Performance
      Indicator  (API)  based on Performance  Based  appraisal  System
      (PBAS) developed by UGC in these Regulations.
 
      CANDIDATES FROM INDUSTRY & PROFESSION
 
      1. Consistently good academic record with at least 55% marks  in
      Master's  Degree in Business Management / Administration / in  a
      relevant  management  related discipline  or  consistently  good
      academic record with at least 55% marks in two years full time /
      three year part-time PGDM declared equivalent and recognized  by
      AICTE / UGC.
                                   OR
 
      First  Class  graduate  and  professionally  qualified   Charted
      Accountant  / Cost and works Accountant / Company  Secretary  of
      the concerned statutory body.
 
      2. The candidate should have professional work experience  which
      is significant and can be recognized at national / International
      level as equivalent to Ph.D. and 15 years' managerial experience
      in industry / profession of which at least 8 years should be  at
      least at level comparable to that of Reader.
 
      3 Teaching, Teaching, research industrial and / or  professional
      experience in a reputed organization;
 
      4.  Published  work, such as research papers,  patents  filed  /
      obtained, books and / or technical reports;
 
      5. experience of guiding the project work / dissertation of PG /
      Research students or supervising R&D project in industry;
 
      6. Demonstrated leadership in planning and organizing  academic,
      research, industrial and / or professional activities;
 
      7.  Capacity to undertake / lead sponsored R&D  consultancy  and
      related activities;
       8.  A  minimum score as stipulated in the  Academic  Performance 
      Indicator (API) based Performance Based Appraisal System  (PBAS)
      devloped by UGC in these Regulations.
 
 05.  Associate Professor of Law, for the Centre of Malappuram  (1 Post)
 06.  Associate Professor of Law, for the Centre of Murshidabad (1 Post)
 
      QUALIFICATIONS - ESSENTIAL :
       i)   Good   Academic  Record  with  a  Ph.D.   degree   in   the 
      concerned/allied/relevant disciplines.
 
      ii)  55%  of  the marks, or equivalent  grade  wherever  grading
      system is followed at the Master's degree level.
       iii) A minimum of five years of experience of teaching and /  or 
      research in an academic/research position equivalent to that  of
      Assistant  Professor  in  a  University/College  or   Accredited
      Research  Institution/industry  excluding  the  period  of  Ph.D
      research  with  evidence of published work and a minimum  of  5
      publications   as  books  and  /or  research/policy  papers   in
      indexed/ISBN/ISSN   numbered   books/journals   and   University
      developed  -ISBN/ISSN list of journals hosted in the website  of
      the concerned University.
 
      iv)  Contrubution  to  educational  innovation,  design  of  new
      curricula  and  courses,  and  technology  -  mediated  teaching
      learning   process  with  evidence  of  havin  guided   doctoral
      candidates and research students.
       v)  A  minimum score as stipulated in the  Academic  Performance 
      Indicator (API) based Performance Based Appraisal system  (PBAS)
      developed by UGC in these Regulations.
   07.  Assistant Professor in Law  for the Centre of Malappuram (1 Post)
  08.  Assistant Professor in Law  for the Centre of Murshidabad (1 Post)
  09.  Assistant  Professor  in  Law ( Economics)  for  the  Centre  of
       Malappuram (1 Post)
  10.  Assistant  Professor  in  Law ( Economics)  for  the  Centre  of
       Murshidabad (1 Post)
  11.  Assistant  Professor in Law ( Political Science) for the  Centre
       of Malappuram (1 Post)
  12.  Assistant  Professor in Law ( Political Science) for the  Centre
       of Murshidabad (1 Post)
  13.  Assistant  Professor  in  Law ( Sociology)  for  the  Centre  of
       Malappuram (1 Post)
 14.   Assistant  Professor  in  Law ( Sociology)  for  the  Centre  of
       Murshidabad (1 Post)
 15.   Assistant  Professor  in  Law  (  History)  for  the  Centre  of
       Malappuram (1 Post)
 16.   Assistant  Professor  in  Law  (  History)  for  the  Centre  of
       Murshidabad (1 Post)
 17.   Assistant  Professor  in  Law  ( English),  for  the  Centre  of
       Malappuram (1 Post)
 18.   Assistant  Professor  in  Law  ( English),  for  the  Centre  of
       Murshidabad (1 Post)
       QUALIFICATIONS - ESSENTIAL
       i)  Good academic record as defined by the concerned  university 
      with at least 55% of the marks or equivalent grade where grading
      system  is practiced at the Master's degree level in a  relevant
      subject form an Indian University, or an equivalent degree  from
      an accredited foreign university.
 
      ii)  Besides fulfilling the above qualification,  the  candidate
      should   have  cleared  the  National  Eligibility  Test   (NET)
      conducted by the UGC, CSIR or similar test accredited by the UGC
      like SLET/SET.
       iii)  Holders of Ph.D. degree as on the date of Notification  of 
      these Regulations, along with those candidates who are awarded a
      Ph.D.  Degree  through a Process  of  admission,  registratioin,
      course  work  and external evaluation as laid down  in  the  UGC
      (Minimum  Standard  and  procedures  for  award  of  M.Phil/Ph.D
      Degree),  Regulation,  2009 and so adopted  by  the  university,
      shall be exempted from NET/SLET/SET.
 
 19.  Assistant Professors in Business Administration  for the  Centre
      of Malappuram (3 Post)
 20.  Assistant Professors in Business Administration  for the  Centre
      of Murshidabad (3 Post)
       QUALIFICATIONS - ESSENTIAL
       A    Masters    Degree    with    55%    marks    in    Business 
      Management/Administration/in  a  relevant  management   related
      discipline  or  first class in two year full time /  three  year
      part-time PGDM declared equivalent and accredited by AICTE / UGC
 
                                     OR
 
      First  Class  graduate  and  professionally  qualified   Charted
      Accountant/ Cost and works Accountant / Company Secretary of the
      concerned statutory bodies.
       A  minimum  score  as stipulated  in  the  Academic  Performance 
      Indicator  (API) based Performance Based Appraisal System  (PBAS)
      developed by UGC in these Regulations.
 
 
      NOTE:
      1.   A relaxation of 5% may be provided from 55% to 50%  of  the
      marks  at the Master's/Graduate level for  the  SC/ST/Physically
      and visually handicapped candidates.
 
      2.  A relaxation of 5% may be provided from 55% to  50%  of  the
      marks to the Ph.D. degree holders who have passed their Master's
      degree prior to 19th September, 1991.
      3.  Relevant grade which is regarded as equivalent of 55%  where 
      the  grading system is followed by recognised  University  shall
      also be considered eligible
  21.  Assistant  Registrar  (Admin, Admission, Examination),  for  the 
      Centre of Malappuram (1 Post)
 
 22.  Assistant  Registrar (Admin., Admission, Examination),  for  the
      Centre of Murshidabad (1 Post)
       Scale/PB Rs. 15600-39100 GP Rs.5400  plus allowances  
       QUALIFICATIONS - ESSENTIAL :
       1. A  Post-graduate  degree  with  at least  55%  marks  or  its 
         equivalent grade.
      2. Five  years  administrative  experience  as  Section  Officer
         (Admin) or   in   an   equivalent   post   in   an    academic
         Institution/Government       Office/Public       undertaking/
         Multinational Corporation / Private reputed Companies.
 
      Desirable:  Sufficient experience of Development of Packages  on
      RDBMS  viz.  SYBASE, ORACLE B/ POWER BUILDER/ DESIGNER  FORMS  &
      etc.
  23.  Assistant Finance Officer, for the Centre of Malappuram( 1 Post)  
 24.  Assistant Finance Officer, for the Centre of Murshidabad (1 Post)
       Scale/PB Rs. 15600-39100 GP Rs. 5400  plus allowances  
       QUALIFICATIONS - ESSENTIAL :
 
      1.  A  Post-graduate degree with at least 55% marks or  its
          equivalent grade.
 
      2.  Five years administrative experience as Section Officer
          (Accounts)  or  in an equivalent post in  any  academic
          Institution/  Government Office / Public undertaking  /
          Multinational Corporation/Private reputed Companies.
                             OR
 
         Chartered   Accountancy  with  03  years  experience   in
         Financing & Accountancy
       DESIRABLE: Sufficient experience of Development of Packages 
                 on RDBMS viz. SYBASE, ORACLE 8/ POWER BUILDER.
  25.  Section Officer  (Admin, Admission, Examination) for the  Centre 
      of Malappuram (1 Post)
 26.  Section Officer  (Admin, Admission, Examination) for the  Centre
      of Murshidabad (1 Post)
       Scale/PB Rs. 9300-34800 GP Rs. 4600  plus allowances  
       QUALIFICATIONS-ESSENTIAL :
       1. Bachelor's degree from a recognised University
       2. Five  years  experience  of  Office  administration  in   the 
         capacity of Assistant (Admin) or equivalent in a  University/
         Academic Institution /Central Government /State Government  /
         Govt undertaking.
       3. Knowledge of Computer Specially MS OFFICE.
  27.  Semi  Professional  Assistant, for the Centre of  Malappuram (1 Post)    
 28.  Semi  Professional  Assistant, for the Centre of  Murshidabad  (1 Post)
       Scale/PB Rs. 5200-20200 GP Rs. 2800 plus allowances 
         QUALIFICATIONS-ESSENTIAL :
         M.A./M.Sc/ M.Com. with B.Lib. Science OR  one year Diploma  in 
        Library Science .
                              OR
         B.A./B.Sc./B.Com.  with  B.Lib.  Science  or  one  year   Post 
        Graduate Diploma in Library Science
 
         29   Assistant, for the Centre of Malappuram (1 Post)
 30   Assistant, for the Centre of Murshidabad (1 Post)
       Scale/PB Rs. 9300-34800 GP Rs. 4200 Plus Allowances 
       QUALIFICATIONS-ESSENTIAL :
       1 Bachelor's degree from a recognised University.
       2.  Three  years  experience in the capacity of  Upper  Division 
          Clerk  or equivalent in a University/ Academic  Institution/
          Central    Government/    State    Government/    Government
          undertaking.
       3. Knowledge  of Computer specially MS OFFICE, Excel  Accounting 
         packages.
For more:- http://www.amuregistrar.com/vacancies.html

   
   
Engineers vacancies in RITES- Andhra and tamil nadu
November 8, 2010 at 10:04 AM
 

REQUIRES Engineers in Mech /M & C disciplines through Walk-in-Interview for posting in the state of Uttar Pradesh, West Bengal, Chhattisgarh, Maharashtra,

Andhra Pradesh & Tamil Nadu

RITES Ltd. a premier consultancy organization is in urgent need of dynamic and hard working Engineers in Mech./ M&C Disciplines for its projects spread all over India. The appointment shall be purely on contract basis initially for a period of one year, extendable based on satisfactory performance until completion of the assignment. The selected candidates are liable to be posted any where in India, as per requirement. Reservations & relaxation to SC/ST/OBC/Ex-Servicemen and Physically handicapped persons would be provided as per extant Govt. orders.

Ghaziabad / Kanpur (UP)

  • No. of Vacancies: 12 posts

Durgapur (Wes Bengal)

  • No. of Vacancies: 06 posts

Bhilai/ Raipur/ Nagpur (Chhattisgarh/ Maharashtra)

  • No. of Vacancies: 22 posts

Chennai / Vishakhapatanam (Tamilnadu/ Andhra Pradesh)

  • No. of Vacancies: 14 posts

Qualification:  1st class Degree in Mech./M&C discipline (2nd class for SC/ST/OBC) with minimum 02 years post qualification experience.

Kolkata: Walk-in-Interview from 13/11//2010 from 10.00 hours at various places

qualification

1st class Degree in Mech./M&C discipline (2nd

class for SC/ST/OBC) with minimum 02 years

post qualification experience in the industry in

their relevant fields. They should have

experience in the field of production/maintenance

of quality control organizations/ department of

large production/ industrial houses and preferably,

be familiar with Testing/ Inspection procedures of

materials and equipments.

For more :- http://www.rites.com/web/images/stories/uploadVacancy/QA_Oct_10.pdf

   
   
Naukri in GJUST – Guru Jambheshwar University of Science & Technology – sarkari naukri in india
November 8, 2010 at 9:56 AM
 

Naukri in GJUST – Guru Jambheshwar University of Science & Technology – sarkari naukri in india

GJUST Recruitment 2010: Guru Jambheshwar University of Science & Technology (GJUST) has given a detail advertisement for the recruitment of Various Vacancies like Medical Officer, Engineer, Controller of Examination, Deputy Director, Assistant Registrar and Other Jobs.

Last date 30.11.2010

Vacancies:-

Controller of Examination

  • No. of Vacancies: 01 post

Deputy Director

  • No. of Vacancies: 01 post

Assistant Registrar

  • No. of Vacancies: 01 post

Medical Officer (Male)

  • No. of Vacancies: 01 post

Public Relations Officer

  • No. of Vacancies: 01 post

Junior Programmer

  • No. of Vacancies: 04 posts

Junior Engineer

  • No. of Vacancies: 03 posts

Divisional Accountant

  • No. of Vacancies: 02 posts

X-Ray Technician

  • No. of Vacancies: 01 post

Nurse

  • No. of Vacancies: 01 post

Store Keeper

  • No. of Vacancies: 03 posts

Workshop Instructor

  • No. of Vacancies: 08 posts

Sanitary Instructor

  • No. of Vacancies:  01 post

Lab Technician

  • No. of Vacancies: 01 post

Cameraman-cum-Studio Attendant

  • No. of Vacancies: 01 post

Hostel Care Taker

  • No. of Vacancies: 03 posts

Driver

  • No. of Vacancies: 01 post

Steno Typist

  • No. of Vacancies: 13 posts

Clerk-cum-JDEO

  • No. of Vacancies: 24 posts

Peon

  • No. of Vacancies: 16 posts

Animal Attendant

  • No. of Vacancies: 01 post

Librarian or Technician

  • No. of Vacancies: 01 post

Hostel Attendant

  • No. of Vacancies: 01 post

The prescribed application‐form alongwith a copy of qualifications may be obtained from the Assistant Registrar (Establishment) on cash payment of Rs. 500/‐ (Rs. 125/‐ for SC& BC candidates of Haryana State only) or by post by sending a demand draft of Rs. 550/‐ (Rs. 175/‐ for SC & BC candidates of Haryana State only) in favour of Registrar, GJUS&T, Hisar, payable at Hisar. Request for application‐forms through registered post will be entertained upto 22.11.2010 only.

The prescribed application form alongwith a copy of qualifications for the above posts can also be downloaded from the University website for which the candidates are required to remit the cost of application form as stated above for each case. The candidates are required to attach attested copies of certificates (Matric onwards) with their application form. The application form alongwith OMR form duly filled in should reach the office of Assistant Registrar (Estt.), Guru Jambheshwar University of Science and Technology, Hisar‐125 001 latest by 30.11.2010. Incomplete applications or those received after the closing date for any reasons including postal delay will not be entertained. The candidates must be eligible on the last date for submission of application form. The University reserves the right to increase/decrease the number of posts or it may not fill any of the posts advertised without assigning any reason. Those in service should send their application through proper channel.

Age : 18 to 50 years (Relaxable for the post of Controller of Examinations) for all above posts. The University may short list the candidates based on certain criteria if the number of applications happens to be large for any category. Reservation of posts will be for Haryana Residents only and as per the reservation policy of State Govt.

For  more:- http://www.gjust.ac.in./posts/posts.htm

   
   
Zensar Placement Paper Held on 3 March 2008 Technical Section
November 8, 2010 at 9:10 AM
 

zensarlogoPaper: Zensar Placement Paper Held on 3 March 2008 Technical Section

1)which is the fastest : FTP ,TELNET ,TCP, etc.

2)output:
main(){
int x=20 ,y=35;
x= x++ + y++;
y = ++x + ++y;
printf(?%d %d?,x,y);
}

3)char *p[]=?rachit and devender?;
printf(?%C?,++(p[4]));

4)const char *p[]=?abhishek and Ankur?;

char k=?a?;
p[1]=k;

printf(?%s?,p);

5)main(){

extern int i;

i=5;

printf(?%d?,i);

}
6) main(){
int i,j=2;

if(i%j !=0)

j=5;

printf(?%d?,j);

}

For what values if i the output will be 5 : options 1)when i is even 2) odd 3)prime 4) fro all

7)complexity of merge sort .?

8)which sorting also will use to sort {1,2,3,4,5} ?

9)which cpu register holds the address of next instruction?

10)Main(){
Char *p[]=?pradeep mani?;
Printf(?%c%c%c%c?,p[i],i[p],(*p+1),*(p+1));
}

11) select * from dual ; output..??

sarkari naukri

   
   
ZTE PAPERS PATTERN DEC 2006 Networking
November 8, 2010 at 8:47 AM
 

ztelogoPaper : ZTE PAPER PATTERN ON 21 DEC 2006 Networking

Topics you should cover are

IP addresses
*

TCP/IP and OSI models
*

GSM and CDMA technologies in detail
*

SS7 signalling
*

Wireless communication (Book Rappaport and Forouzen)

Afterwards they made a group of five members each and asked our group to perform an activity (I think it was just to check your team skill) I was the person to give presentation about that activity and at this phase I was a bit sure that I will go through the selection procedure. After that they organized a group discussion (this was a total new type of g.d. for me ) I was selected the group leader. Afterwards there was a technical interview (covering all the above mentioned topics)… hard one of course!

And finally I made through the selection procedure of ZTE. Thanks God I have been selected for their MSC operations.

sarkari naukri

   
   
ZTE PAPERS PATTERN 2006 MAR -AT CHANDIGARH
November 8, 2010 at 8:24 AM
 

ztelogoZTE PAPER PATTERN ON MAR 2006 -AT CHANDIGARH

I m Tasneem, a final year student in Electronics & Communications want to share my ZTE (Chinese Telecom Equipment Vendor) experience with you:

There were 22 students, out of which 18 were either 2004,05 or 2003 passouts, I along with 3 others were freshers, Firstly they took a technical test of 100 marks, duration 1 hr:

1. Write all layers of OSI Model and briefly explain them  ?  -   10 marks
2. What is difference between GSM & CDMA ? -   10 marks
3. Draw any communication model(GSM/CDMA)?-  10  marks
4. Explain all multiplexing techniques(TDMA/FDMA/CDMA)-  10 marks
5. Write about AM,FM & PCM ? -  10 marks

There were 10 questions of 3 marks each & other 10 ,2 marks each ,all fill in blanks along with objective type: Some of questions I m mentioning are :

1. Which Modulation is used in CDMA?
2. How many slots are in E1 ?
3. CDMA 2000  has data rate of ..?
4. Frequency range of CDMA?
5. Which of following are not forward channels? (Pilot,Sync,Access)
6. Class C specification?
7. Bandwith of one time slot?
8. How may bits are in one burst?
9. Which of following connect  two networks?(Router,Switch,Hub)
10. CDMA Stands for :
11. Two types of Frequency Hopping

The technical test went excellent for me,after that it was time for 30 minutes aptitude test? Which had some tricky questions like:

1. Which of the two countries have square flags?
2. Which comes after gigabyte? Terabyte & then???

After that, it was time for group discussion. (Topic : Is India Booming )
At the last they took an interview, technical along with hr, well for me they took 25 minutes to complete askin me questions..oopes..big inteview for me..reg my 6 months practical training at Nokia India Pvt Ltd and general questions like why u didn’t opt for MBA,why do u want to join ZTE,weakness 7 good qualities sort of stuff.

sarkari naukri

   
   
ZTE Telecom Placement Papers Pattern
November 8, 2010 at 8:03 AM
 

ztelogoZTE Telecom Placement Paper Pattern Held On 21st December 2006

Hi all!

This is Iffat Rizvi(B.Tech. Electronics). I had a great experience with ZTE. Firstly they take a written test.

Topics you should cover are: IP addresses TCP/IP and OSI models GSM and CDMA technologies in detail SS7 signaling. Wireless communication (Book Rappaport and Forouzen) Afterwards they made a group of five members each and asked our group to perform an activity( I think it was just to check your team skill) I was the person to give presentation about that activity and at this phase I was a bit sure that I will go through the selection procedure After that they organized a group discussion (this was a total new type of GD. for me ) I was selected the group leader. Afterwards there was a technical interview (covering all the above mentioned topics) hard one off course! And finally I made through the selection procedure of ZTE. Thanks God I have been selected for their MSC operations. Waiting for the posting and project assignment now.

sarkari naukri

   
   
Non teaching jobs in MGKVP- Mahatma Gandhi Kashi Vidyapeeth – sarkari naukri
November 8, 2010 at 1:52 AM
 

Mahatma Gandhi Kashi Vidyapeeth Recruitment: Mahatma Gandhi Kashi Vidyapeeth (MGKVP) has given a detail advertisement for the recruitment of Non-Teaching Vacancies.

Vacanvies

Cataloguer

  • No. of Vacancies: 02 posts

Estate Officer

  • No. of Vacancies: 01 post

Social Worker

  • No. of Vacancies: 01 post

X-Ray Technician

  • No. of Vacancies: 01 post

Craft Teacher (Women)

  • No. of Vacancies: 01 post

Driver

  • No. of Vacancies: 02 posts

Library Attendant

  • No. of Vacancies: 01 post

Book Binder

  • No. of Vacancies: 01 post

Part Time Medical Officer (Ayurveda)

  • No. of Vacancies: 01 post

Part Time Medical Officer (Allopath)

  • No. of Vacancies: 01 post

Last date: 22/11/2010
More:- http://www.mgkvp.ac.in./

   
   
RECRUITMENT IN tnpl – TAMIL NADU NEWSPRINT AND PAPERS LIMITED, SARKARI NAUKRI IN TAMIL NADU
November 8, 2010 at 1:06 AM
 

RECRUITMENT IN tnpl – TAMIL NADU NEWSPRINT AND PAPERS LIMITED, SARKARI NAUKRI IN TAMIL NADU

TNPL, a well known Paper Manufacturing Company with a turnover of over Rs.1000 Crore

is looking for the following personnels for its Paper Mills and for its 600 tpd Cement Plant

being set up at Kagithapuram in Karur District, Tamilnadu.

Vacancies:"-

Assistant Shift Engineer (Chemical)

No. of Vacancies: 07 posts

Deputy Manager (Electrical Instrumentation)

No. of Vacancies: 01 post

Deputy Manager (Chemical)

No. of Vacancies: 01 post

Assistant Manager (Civil)

No. of Vacancies: 01 post

Plant Engineer (Mechanical)

No. of Vacancies: 01 post

Assistant Plant Engineer (Mechanical)

No. of Vacancies: 01 post

Assistant Plant Engineer (Electrical)

No. of Vacancies: 01 post

Assistant Plant Engineer (Instrumentation)

No. of Vacancies: 01 post

Officer (Accounts)

No. of Vacancies: 01 post

Assistant Officer (Stores)

No. of Vacancies: 01 post

Assistant Officer – HR

No. of Vacancies: 01 post

Candidates who conform to the job requirements as given in the website may apply in
strict confidence superscribing the name of the post within 15 days from the date of
release of this advertisement to:
GENERAL MANAGER – HR
TAMIL NADU NEWSPRINT AND PAPERS LIMITED
Kagithapuram – 639 136, Karur District, Tamil Nadu
Giving full details of age, qualifications with year of passing, community, experience, salary
drawn and position being held along with copies of testimonials towards proof for the
same.
Applications received through post with requisite information / supporting
documents will only be considered.
Last date for receipt of applications : 17/11/2010

Candidates who conform to the job requirements as given in the website may apply instrict confidence superscribing the name of the post within 15 days from the date ofrelease of this advertisement to:GENERAL MANAGER – HRTAMIL NADU NEWSPRINT AND PAPERS LIMITEDKagithapuram – 639 136, Karur District, Tamil NaduGiving full details of age, qualifications with year of passing, community, experience, salarydrawn and position being held along with copies of testimonials towards proof for thesame.Applications received through post with requisite information / supportingdocuments will only be considered.

Last date for receipt of applications : 17/11/2010

fOR MORE:- http://www.tnpl.com/Careers/hr%20advt%2003nov2010%20v1.pdf

   
   
Sarkari naukri in BVFCL, Jobs in BRAHMAPUTRA VALLEY FERTILIZER CORPORATION LIMITED
November 8, 2010 at 12:53 AM
 

BRAHMAPUTRA VALLEY FERTILIZER CORPORATION LIMITED

(A Government of India Undertaking)

Corporate Office, Namrup,

P.O. Parbatpur, Dist. Dibrugarh, Assam:

Brahmaputra Valley Fertilizer Corporation Ltd, emerged as a new Company in 2002 after its de-merger from Hindustan Fertilizer Corporation Ltd. The production units of the Corporation situated in Namrup, Assam have been revamped and modernized recently. BVFCL having two Ammonia and two Urea plants in operation with total production capacity of 5.55 lakh MT of Urea per annum invites applications from Indian nationals for the following posts:

1. General Manager (Marketing) / Dy. General Manager (Marketing)

JOB REQUIREMENT:- As a GM (Marketing) / Dy. GM (Marketing), he will function as overall in charge of marketing and be responsible for planning, budgeting, cost control, building /nourishing channel network, brand promotion ventures particularly for finished product (fertilizers) growth target as well as sales/collection, distribution in all the states. Knowledge and expertise in manufacturing of vermi Compost & sales of Bio-Fertilizer,

trading of pesticides, MOP & DAP is desirable. Should be competent in team building, management of dealer network and business area administration.

QUALIFICATION & EXPERIENCE :- Post Graduate Degree in Agriculture or MBA with specialization in Marketing. Minimum 20/16 years experience in the line, out of which at least 8 / 6 years in senior managerial/executive position. The position requires an aggressive, well motivated person with proven record in organizing marketing of agriculture inputs, preferably fertilizer on All India basis.

Age limit:- Maximum 55 / 53 years as on 01.10.2010

2. Area Manager (Marketing)

JOB REQUIREMENT:- Responsible for overall activities related to marketing of Corporation's products i.e. Urea, Bio-fertilizer and trading of Seeds, MOP, Pesticides in their assigned territory.

QUALIFICATION & EXPERIENCE :- MSc(Agri) / BSc (Agri) (MBA in Marketing desirable).

Minimum 8/10 years experience in Marketing of Urea, MOP, seeds & pesticides.

Age limit:- Maximum 48 years as on 01.10.2010

3. Sales Officer

JOB REQUIREMENT:- Responsible for overall activities related to marketing of

Corporation's products i.e. Urea, Bio-fertilizer and trading of Seeds, MOP, Pesticides.

QUALIFICATION & EXPERIENCE :- MSc(Agri) / BSc (Agri) (MBA in Marketing desirable). Minimum 3 / 5 years experience in Marketing of Urea, MOP, seeds & pesticides.

Age limit:- Maximum 40 years as on 01.10.2010

For More: – http://www.bvfcl.com/Uploads/File/Carriers/Advt%20_MKTG_.pdf

   
   
Faculty post in MGKVP, sarkari naukri in mgkvp
November 8, 2010 at 12:40 AM
 

MGKVP Recruitment 2010: Mahatma Gandhi Kashi Vidyapeeth (MGKVP) has given a detail advertisement for the recruitment of Faculty Vacancies.

Last Date:  30/11/2010

Vacancies

Professor

No. of Vacancies: 05 posts

Pay Scale: Rs.37400-67000 AGP Rs.10000

Reader (Associate Professor)

No. of Vacancies: 02 posts

Pay Scale: Rs.37400-67000 AGP Rs.9000

Lecturer (Assistant Professor)

No. of Vacancies: 10 posts

Pay Scale: Rs.15600-39100 AGP Rs.6000

   
   
ABB Placement Paper Held 2004 At Vadodara
November 7, 2010 at 3:02 PM
 

abbPaper: ABB Placement Paper Held On 2 May 2004 At Vadodara (Technical)

(1) in a ckt. We r giving voltage of 50 Hz as well as 60. then what will be the resultant frequency.

(a)less than 50 (b)more than 60(c)in between 50 & 60 (d)none

according to our conclusion answer will be none because if we apply two frequency component resultant frequency we can not say with such an ease. U should confirm the answer

2.In a ckt a single resistor is connected across a d.c. source, what will be the effect on current in first resistor if we connect one more resistance in parallel with earlier one.

Ans:- no change since it is a parallel combination.

3.why we don,t like flashover in transmission line (t-line)-

(a ) it may create earth fault  ( b ) it reduces the life of insulator…..

4.total no of strands in a acsr conductor is 81, then what is the no. of conductor in its outer layer….(a)36 (b)18 (c)24…….Also read some more on acsr.

5.Two questions based on p.u. calculation like , p.u. calculation is given with respect to some old base and u have to calculate it with reference to new base.

6.which table is referred for sag calculation-

Ans:- stringing

7.in a R-L ckt a ac voltage is applied , such that instantaneous power is negative for 2ms, then what will be the power factor.

(a) 9 deg, (b) 18 deg, (c) 36 Deg

8. In an incandescent lamp

(a) luminous intensity is more than non-luminous intensity

(b) ,, ,, ,, less ,, ,,

Ans: Since efficiency is less than 100%, hence ans is (b), u should confirm it further.

9. In which motor no-load to full-load diff. is lowest

(a) series motor, (b) shunt motor, (c) Compound motor

Ans: (b)

10. In a 60Hz induction motor full load speed is 850 rpm then what is the Synchronous speed.

(a) 900 rpm, (b) 950 rpm, (c) 1600 rpm Ans: (a)

11. A sync. Motor is running at synch. Speed, if al of sudden D.C. excitation is removed, then

(a) it will rotate at slip speed,  (b) it will stop,  ( c) it will continue to rotate at sync. Speed

Ans: (a), because actually it will acts as Induction motor.

12. A transmission line is designed for 50Hz, 440KV. If we want to transfer power at 60Hz, 440 KV, then the power transfer capability will

(a) decrease, (b) Increase, (c) None

Ans: (a).as P=( |Vt| |Ef| sin (delta) ) / X, where (delta) is torque angle.

13. Increased rotor resistance in rotor ckt of induction motor is related with

(a) high starting torque, (b) more speed variation   Ans: (a)

14. In the formulae E = 4.44 f N Ô, Ô is

(a) Avg value, (b) Rms value, (c) Maximum value   Ans: (a)

15. Voltage & current in a ckt is given by V= V1+j V2 and I= I1 +j I2, then rms power is

16. Input impedence of MOSFET is

Ans:-  more than BJT

17. Remember truth table of AND, NOR, NAND, OR, EX-OR ETC…

18. What is Truth Table Explain?

19. Conversion of Binary number into Equivalent decimal No.

20. Megger is used for the measurement of

(a) Insulation resistance, (b) Conductor resistance  Ans: (a)

21. Form factor for sinusoidal as well as DC

22. Formulae of Regulation (Vs- Vr)* 100/ Vr, then transmission line is

(a) short transmission line, (b) long, (c) medium.  Ans: (a)

23. Improvement in power factor reduces

(a) power consumed by consumer, (b) power generation, (c) both a & b    Ans: (c)

24. Read about field test of Series Motor

25. No-load test for Synchronous motor, the graph is drawn

Ans:- stator open ckt emf Vs field current

26. An AC voltage of 50Hz is impressed in a resistive ckt, the oscillating power has a frequency

(a) 50 Hz, (b) 100, (c) no oscillating power is there in resistive ckt.   Ans: (a)

27. Insulation used in transformer ___________leakage flux.

(a) increases, (b) decreases.  Ans: (b)

28.After rain what happens to Insulator

(a) break-down strength of Insulator decreases, (b) Arch length reduces   Ans: (b)

29.Diversity factor helps to …………(what ?)
sarkari naukri
[Read diversity factor, load factor, Reserve capacity factor in depth, with calculation]

30. Why capacitance is shown as a Shunt element in analysis of transmission line

(a) it is between Conductor & earth, (b) because Admittance is used for calculation of capacitive reactance   Ans: (a)

31. B-R-Y sequence is followed in three phase system, if phase voltage in B-phase is Vm sin 100, then the phase voltage in R-phase would be

Ans:- Vm sin (-20)

32. In a particular ckt I = Im Sin (wt -270) and V = Vm Sin wt, then type of ckt is

Ans:-  pure resistive ckt

33. In a L-R ckt energy lost = 2000 W, energy conserved = 500W, then what is the time constant?

Ans: time constant = L/R = 0.5

34. In electro-dynamometer A’ meter & wattmeter the type of scale is

Ans: Non-uniform

35. For the same current carrying capacity corona loss of ACSR will be ________than copper conductor.

(a) more, (b) less, (c) equal. Ans:(b)

36. A R-C ckt , supplied with DC, a bulb is connected across the Capacitor, then what happens to the illumination, if we change the capacitance.

Ans: No change at all

37. Read about surge impendence of over-head and under-ground cable, Surge impedence formula = sqrt(L/C)

sarkari naukri

   
   
ABB Placement Technical Papers – VADODARA POST BY SARKARI NAUKRI
November 7, 2010 at 2:41 PM
 

abbABB Placement Technical Paper – VADODARA

1. In a ckt. We are giving voltage of 50 Hz as well as 60. then what will be the resultant frequency.

* less than 50
* more than 60
* in between 50 & 60
* none

according to our conclusion answer will be none because if we apply two frequency component resultant frequency we can not say with such an ease. U should confirm the answer

2. In a ckt a single resistor is connected across a d.c. source, what will be the effect on current in first resistor if we connect one more resistance in parallel with earlier one.

Answer.. no change since it is a parallel combination.

3. why we don,t like flashover in transmission line (t-line)-
(a ) it may create earth fault(b )it reduces the life of insulator..

4.total no of strands in a acsr conductor is 81, then what is the no. of conductor in its outer layer..(a)36 (b)18 (c)24..Also read some more on acsr.

5.Two questions based on p.u. calculation like , p.u. calculation is given with respect to some old base and u have to calculate it with reference to new base.

(new resistance/old)=(mva new /mva old)*(old voltage/new voltage)2.

Other question is based upon transfer of p.u calculation in transformer i.e. how base changes when we we move from primary to secondary or like wise.read some more on p.u calculation.

6.which table is referred for sag calculation-
(a)stringing chart..answer

7.in a R-L ckt a ac voltage is applied , such that instantaneous power is negative for 2ms, then what will be the power factor.
a) 9 deg, (b) 18 deg, (c) 36 Deg.

8. In an incandescent lamp
(a) luminous intensity is more than non-luminous intensity

Ans: Since efficiency is less than 100%, hence ans is (b), u should confirm it further.

9. In which motor no-load to full-load diff. is lowest
(a) series motor, (b) shunt motor, (c) Compound motor
Ans: (b)

10. In a 60Hz induction motor full load speed is 850 rpm then what is the Synchronous speed. (a) 900 rpm, (b) 950 rpm, (c) 1600 rpm
Ans: (a)

11. A sync. Motor is running at synch. Speed, if al of sudden D.C. excitation is removed, then
(a) it will rotate at slip speed, (b) it will stop, (c) it will continue to rotate at sync. Speed

Ans: (a), because actually it will acts as Induction motor.

12. A transmission line is designed for 50Hz, 440KV. If we want to transfer power at 60Hz, 440 KV, then the power transfer capability will
(a) decrease, (b) Increase, (c)None

Ans: (a) ..as P=( |Vt| |Ef| sin (delta) ) / X, where (delta) is torque angle.

13. Increased rotor resistance in rotor ckt of induction motor is related with
(a) high starting torque, (b) more speed variation,
Ans: (a)

14. In the formulae E = 4.44 f N ?, ? is
(a) Avg value, (b) Rms value, (c) Maximum value
Ans: (a)

15. Voltage & current in a ckt is given by V= V1+j V2 and I= I1 +j I2, then rms power is (refer book by Edministrator on NETWORK ..)

16. Input impedence of MOSFET is
(a) more than BJT..(Ans)

17, 18. Remember truth table of AND, NOR, NAND, OR, EX-OR ETC

19. Conversion of Binary number into Equivalent decimal No.

20. Megger is used for the measurement of (a) Insulation resistance, (b) Conductor resistance
Ans: (a)

21. Form factor for sinusoidal as well as DC

22. Formulae of Regulation (Vs- Vr)* 100/ Vr, then transmission line is
(a) short transmission line, (b) long, (c) medium
Ans: (a)

23. Improvement in power factor reduces
(a) power consumed by consumer, (b) power generation, (c) both a & b
Ans: (c)

24. Read about field test of Series Motor

25. No-load test for Synchronous motor, the graph is drawn
(a) stator open ckt emf Vs field current (Ans: a)

26. An AC voltage of 50Hz is impressed in a resistive ckt, the oscillating power has a frequency (a) 50 Hz, (b) 100, (c) no oscillating power is there in resistive ckt
Ans: (a)

27. Insulation used in transformer ___________leakage flux.

(a) increases, (b) decreases Ans: (b)

28.After rain what happens to Insulator (a) break-down strength of Insulator decreases, (b)Arch length reduces,
Ans: (b)

29.Diversity factor helps to . . . .(what ?)
[Read diversity factor, load factor, Reserve capacity factor in depth, with calculation]

30. Why capacitance is shown as a Shunt element in analysis of transmission line
(a) it is between Conductor & earth, (b) because Admittance is used for calculation of capacitive reactance
Ans: (a)

31. B-R-Y sequence is followed in three phase system, if phase voltage in B-phase is Vm sin 100, then the phase voltage in R-phase would be (a) Vm sin (-20)
Ans:(a)

32. In a particular ckt I = Im Sin (wt -270) and V = Vm Sin wt, then type of ckt is (a) pure resistive ckt [Ans]

33. In a L-R ckt energy lost = 2000 W, energy conserved = 500W, then what is the time constant
Ans: time constant = L/R = 0.5

34. In electro-dynamometer A’meter & wattmeter the type of scale is Ans:Non-uniform

35. For the same current carrying capacity corona loss of ACSR will be ________than copper conductor. (a) more, (b) less, (c) equal
Ans:(b)

36. A R-C ckt , supplied with DC, a bulb is connected across the Capacitor, then what happens to the illumination, if we change the capacitance.
Ans: No change at all

37. Read about surge impendence of over-head and under-ground cable, Surge impedence formula = sqrt(L/C)

We are not mentioning the options in sequence, and do not think that ans for the most questions is option (a). Read all options very carefully as all are very close to each other.

QUANTITATIVE PAPER + PCM paper

1. About 10 quanti questions ( based on Mixture, Work etc. of very easy type)

2. What is GDP ?

3. Vector algebra, codition for Co-planer vector etc.

4. Gravitation, geo-synchronous satellite( it’s hight, orbit , radius etc.), escape velocity, how g (gravitational accln) varies, about gravitational potential.

5. Basic electricity and Magnetism—-Biot-savart law, current carrying conductor properties.

6. Nuclear physics, Bohr’s constant, and Other theories related .

7. Problem based on VIBGYOR , how wave length and frequency is varying.

8. Questions based on Plank’s Theory, E =hv

9. V=u + at , V2=u2 + 2as and W = mgh questions based on above theory

10. Faraday’s laws of electrolysis, m = Zit

11. Heat conduction problem.

12. Co lour-coding of resistor (BBROYGBVGW)

13. How velocity of light changes in different medium while frequency remain unchanged.

14. statistics , calculation of mode, co-efficient regression (3-4 Questions)

15. f(x) = Sin x + Cos x, find the maximum value of the function

16. Formulae for parallel plate capacitor and force between plates.
sarkari naukri

   
   
ABB Placement Papers Pattern bangalore
November 7, 2010 at 2:28 PM
 

abbABB Latest Placement Paper Pattern | Bangalore

TECHNICAL PAPER

  • NO. OF QUESTIONS : 40
  • TIME: 45 MINUTES

1. in a ckt. We r giving voltage of 50 Hz as well as 60. then what will be the resultant frequency.
(a)less than 50 (b) more than 60 (c) in between 50 & 60 (d) none

2.In a ckt a single resistor is connected across a d.c. source, what will be the effect on current in first resistor if we connect one more resistance in parallel with earlier one….

3.why we don,t like flashover in transmission line (t-line)- (a ) it may create earth fault(b )it reduces the life of insulator…..
Read something about flashover & puncture.

4.total no of strands in a acsr conductor is 81, then what is the no. of conductor in its outer layer….(a)36 (b)18 (c)24…….Also read some more on acsr.

5.Two questions based on p.u. calculation like , p.u. calculation is given with respect to some old base and u have to calculate it with reference to new base. (new resistance/old)=(mva new /mva old)*(old voltage/new voltage) 2 Other question is based upon transfer of p.u calculation in transformer i.e. how base changes when we we move from primary tosecondary or like wise.read some more on p.u calculation.

6.which table is referred for sag calculation-
(a)stringing chart……answer

7.in a R-L ckt a ac voltage is applied , such that instantaneous power is negative for 2ms, then what will be the power factor.
(a) 9 deg, (b) 18 deg, (c) 36 Deg………..(I don,t know the correct ans)

8. In an incandescent lamp
(a) luminous intensity is more than non-luminous intensity (b) ,, ,, ,, less ,, ,, ,,

9. In which motor no-load to full-load diff. is lowest
(a) series motor, (b) shunt motor, (c) Compound motor

10. In a 60Hz induction motor full load speed is 850 rpm then what is the Synchronous speed.
(a) 900 rpm, (b) 950 rpm, (c) 1600rpm…

11. A sync. Motor is running at synch. Speed, if al of sudden D.C. excitation is removed, then
(a) it will rotate at slip speed, (b) it will stop, (c) it will continue to rotate at sync. Speed

12. A transmission line is designed for 50Hz, 440KV. If we want to transfer power at 60Hz, 440 KV, then the power transfer capability will
(a) decrease, (b) Increase, (c) None

13. Increased rotor resistance in rotor ckt of induction motor is related with
(a) high starting torque, (b) more speed variation,

14. In the formulae E = 4.44 f N ?, ? is
(a) Avg value, (b) Rms value, (c) Maximum value

15. Voltage & current in a ckt is given by V= V1+j V2 and I= I1 +j I2, then rms power is…

16. Input impedence of MOSFET is
(a) more than BJT

17, 18. Remember truth table of AND, NOR, NAND, OR, EX-OR ETC…

19. Conversion of Binary number into Equivalent decimal No.

20. Megger is used for the measurement of
(a) Insulation resistance, (b)Conductor resistance

21. Form factor for sinusoidal as well as DC

22. Formulae of Regulation (Vs- Vr)* 100/ Vr, then transmission line is
(a) short transmission line, (b) long, (c) medium

23. Improvement in power factor reduces
(a) power consumed by consumer, (b) power generation, (c) both a & b

24. Read about field test of Series Motor…

25. No-load test for Synchronous motor, the graph is drawn
(a) stator open ckt emf Vs field current

26. An AC voltage of 50Hz is impressed in a resistive ckt, the oscillating power has a frequency
(a) 50 Hz, (b) 100, (c) no oscillating power is there in resistive ckt

27. Insulation used in transformer ___________leakage flux.
(a) increases, (b) decreases

28.After rain what happens to Insulator
(a) break-down strength of Insulator decreases, (b)Arch length reduces

29.Diversity factor helps to …………(what ?) [Read diversity factor, load factor, Reserve capacity factor in depth, with calculation]

30. Why capacitance is shown as a Shunt element in analysis of transmission line
(a) it is between Conductor & earth, (b) because Admittance is used for calculation of capacitive reactance

31. B-R-Y sequence is followed in three phase system, if phase voltage in B-phase is Vm sin 100, then the phase voltage in R-phase would be
(a) Vm sin (-20)

32. In a particular ckt I = Im Sin (wt -270) and V = Vm Sin wt, then type of ckt is (a) pure resistive ckt

33. In a L-R ckt energy lost = 2000 W, energy conserved = 500W, then what is the time constant

34. In electro-dynamometer A,meter & wattmeter the type of scale is

35. For the same current carrying capacity corona loss of ACSR will be ________than copper conductor.
(a) more, (b) less, (c) equal. Ans: (b)

sarkari naukri

   
     
 
This email was sent to fresherhub.sarkari@blogger.com.
Delivered by Feed My Inbox
230 Franklin Road Suite 814 Franklin, TN 37064
Create Account
Unsubscribe Here Feed My Inbox
 
     

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.